Ø1/2" Post-Mountable Component Clamp
![](https://www.thorlabs.us/Images/GuideImages/10530_PostClamp_1.jpg)
- Hold a Large Component in Place Using a Nylon-Tipped Setscrew
- Clamp Down Cylindrical Components up to Ø3"
- Usable as a Mounting Joist
PMTR
Five 1/4"-20 Taps
PMTR/M
Five M6 Taps
Application Idea
2" Beamsplitter Cube Secured to
KM200B Kinematic Mount Using
PMTR Component Clamp
![](../../images/loading-red.gif)
Please Wait
Features
- Five 1/4"-20 (M6 x 1.0) Tapped Thru Holes
- Secure a Prism or Other Component Using a Nylon-Tipped Setscrew
- Slip-On Collar Design Attaches to Ø1/2" Posts Using Thumbscrew
- Use as Mounting Joist to Offset Optical Mounts
The PMTR(/M) Component Clamp can be used to secure prisms, cylindrical components, and other devices. The clamp mounts to our Ø1/2" Posts using a stable double bore and offers five 1/4"-20 (M6) tapped holes. Components are secured using the included 1/4"-20 (M6) nylon-tipped setscrew with 1/8" (3.0 mm) hex. The closest tap is 1" (25.0 mm) from the center of the Ø1/2" post and the farthest tap is 2" (50.0 mm) away. Two of the taps are orthogonal to the post for side-mounting components. Cylindrical components up to 3" (76.2 mm) in diameter may be held in place in a V-mount using the PMTR(/M) Clamp, as shown in the second photo to the right.
Posted Comments: | |
No Comments Posted |