Products Home / Optomechanical Components / Optomechanical Mounts / Optical Filter Mounts / 90° Flip Mounts90° Flip Mounts
- Compact, Easy-to-Operate Design
- Mounts for Round or Rectangular Optics
- Fully Accessible 0° to 90° Range
One Retaining Ring Included
TRF90
Mounts Ø1" Optics
TR05F90
Mounts Ø1/2" Optics
RFM90
Mounts Ø1" and up to
50 mm x 50 mm x 6 mm Optics
Application Idea
ER1.5 Rod Supports Three TRF90 Mounts on One Ø1/2" Post
Please Wait
Features
- Flip Mounts for Ø1/2", Ø1", Ø2", or Rectangular Optics up to 50 mm x 50 mm x 6 mm
- 0° to 90° Flip Mount Range
- Post-Mountable
Thorlabs' 90° Flip Mounts feature a compact, versatile design that allows optics to be easily inserted or removed from the beam path. Our flip mounts for round optics feature a precision detent mechanism to provide a holding force at the 0° and 90° positions. Additionally, two nylon-tipped setscrews (0.05" hex) allow for the mount to be locked into place at any angle between 0° and 90°. Alternatively, the RFM90 flip mount holds Ø1" (25 mm) or rectangular optics using a clamping mechanism with two nylon-tipped setscrews. A pivot joint then allows the mount to be set at almost any angle between 0° and 90°.
| Posted Comments: | |
Christian Finger
(posted 2023-05-17 13:41:12.347) Dear Thorlabs team,
In the Auto CAD PDF of the TRF90/M the approx. weight is given as 1.5kg, which seems a little bit too heavy.
Kind regards,
Christian Finger cdolbashian
(posted 2023-06-01 04:05:46.0) Thank you for noticing this discrepancy. The correct mass should be ~30g, rather than 1.5kg. It should be updated shortly following this post. stockbr
(posted 2013-10-11 10:03:02.423) The link to the low stress retaining ring SM1LTRR on this page:
http://www.thorlabs.com/newgrouppage9.cfm?objectgroup_id=1447&pn=TRF90#1447
is not accurate. It should link to: http://www.thorlabs.com/NewGroupPage9.cfm?ObjectGroup_ID=1535 jlow
(posted 2013-10-11 10:30:00.0) Response from Jeremy at Thorlabs: Thank you for bringing this to our attention. We will correct the link to the SM1LTRR. acable
(posted 2007-11-26 22:02:12.0) The tapped hole in the bottom of this mount goes all the way thru to the rotation mechanis, this makes it possible to sieze the device if a longer than anticipated screw is used. techsupport
(posted 2007-08-31 15:35:39.0) In general a rod lenght of 0.5" (13mm) per flip mount is required. Therefore in order to stack three flip mounts an extension rod with a lenght of 1.5" (38mm) is required, item number is ER1.5. kpurchase
(posted 2007-08-31 14:12:56.0) What length ER post should I order to stack three flip mount filter holders? |
Zoom
Click for Details
A detent force locks the mount at either 0° or 90°. Additionally, the two locking setscrews allow the mount to be locked into place at any angle between 0° and 90°.
- Mounts Ø1/2", Ø1", or Ø2" Optics
- Detent Force at 0° and 90°, Lockable Across Entire Range
- <25 µrad Angular Repeatability at 0° and 90°
- Stackable Design
- Post- and Rod-Mountable
- One Retaining Ring Included
Thorlabs' Flip Mounts for Round Optics are designed to mount Ø1/2", Ø1", or Ø2" optics and can be post mounted individually (
Multiple mounts can be stacked in series using Ø6 mm Cage Rods, as pictured above. Please note the flip mounts are not directly compatible with our cage systems. A flexure mechanism locks the mounts to the cage rod and is engaged by the setscrew on the side of the mount, which is activated with the included 0.05" (1.3 mm) hex key. Since the Ø1/2" and Ø1" mounts are 0.5" (13 mm) thick, one may be mounted per 0.5" length of Ø6 mm cage rod. For example, three Ø1/2" or Ø1" flip mounts may be joined in series on one ER1.5 cage rod. The Ø2" mount is 0.6" (15 mm) thick, and therefore, an ER2 cage rod must be used to secure three Ø2" flip mounts.
Each of these mounts includes a 0.05" (1.3 mm) hex key for adjusting setscrews, as well as a standard retaining ring to mount filters or other optics. The retaining rings can be easily adjusted using one of our spanner wrenches (sold separately), or removed and replaced with one of our stress-free retaining rings or plastic retaining ring (also sold separately). Note that using these special retaining rings changes the maximum thickness of the optic that can be held in this mount. Please refer to the table below for compatible retaining rings and corresponding maximum thicknesses.
Note that the threaded hole used to attach the post to the filter mount goes all the way through to the rotation mechanism. Be sure that no more than 0.2" (5 mm) of the screw on top of the post is threaded into the filter mount in order to prevent the binding of the rotation mechanism. Also note that the flat-head spring detent screw is factory set and not user adjustable.
| Item # | TR05F90(/M) | TRF90(/M) | TR2F90(/M) |
|---|---|---|---|
| Optic Size | Ø1/2" (Ø12.5 mm) | Ø1" (Ø25 mm) | Ø2" (Ø50 mm) |
| Angular Repeatability | <25 µrad | ||
| Retaining Ring, Included (Max Optic Thickness) |
SM05RR (0.38" [9.7 mm]) |
SM1RR (0.37" [9.4 mm]) |
SM2RR (0.46" [11.7 mm]) |
| Compatible Accessories | |||
| Stress-Free Retaining Ring (Max Optic Thickness) |
SM05LTRR (0.30" [7.6 mm]) |
SM1LTRR (0.29" [7.4 mm]) |
SM2LTRR (0.38" [9.6 mm]) |
| Plastic Retaining Ring (Max Optic Thickness) |
N/A | SM1PRR (0.34" [8.6 mm]) |
N/A |
| Compatible Spanner Wrenches | SPW603, SPW603L, or SPW801 | SPW602, SPW606, or SPW801 | SPW604 or SPW801 |
Zoom
Click for Details
The pivot joint on the RFM90 allows the mount to be set at almost any angle between 0° and 90°.
- Mounts Ø1" (25 mm) Optics
- Mounts Rectangular Optics from 24 mm x 10 mm up to 50 mm x 50 mm
- Clamping Mechanism Accepts Optics up to 6 mm Thick
- Pivot Joint Provides Full 0° to 90° Range
- <25 µrad Angular Repeatability at 0°
- 1/4"-20 (M6) and 8-32 (M4) Counterbores for Post Mounting
The RFM90 Flip Mount provides stable mounting for Ø1" round optics or rectangular optics from 24 mm x 10 mm to 50 mm x 50 mm that are up to 6 mm thick. To protect against scratches, the optic is held in place by a clamp with two nylon-tipped setscrews. If a stronger clamping force is desired, the setscrews can be backed out so that the optic is gripped directly by the aluminum arms of the clamp. The setscrews and clamp actuation screw accept a 5/64" (2.0 mm) hex key.
A finely tuned pivot joint* allows the mount to be positioned at almost any angle between 0° and 90°. Magnets at the 0° and 90° positions provide extra holding force. Note that the magnet at the 0° position will pull the mount closed at very small angles. The RFM90 includes one 1/4"-20 (M6) and one 8-32 (M4) counterbore for post mounting.
*The pivot joint consists of a screw and two ball contacts that are factory set and should not be adjusted by the user.
Flip Mounts